New arrive 24V 84leds/m RGB+CCT 2835 LED Strips GL-FB2835RGBCCT84M10W24 for landscape lighting

1.SMD2835 LED Strip Light, DC24V,84leds RGB+84leds CCT, color temperature RGB+CCT;

2.Indoor lighting IP20 and outdoor lighting IP67&IP68;

3.From 10w to 18w adjustable wattage;

4. With standard 3M self-stick , easy for installation;

5. CE Certificated and RoHS compliant;

6. Factory wholesale cost.OEM and ODM service.

Glite RGBCCT 2835 strips can replace 5050 RGB,RGBW and CTT adjustable led strip light.RGB+CCT LED Strip Light use the newest LED as light source conbining 3 in 1 and 2 in 1 led chips:RGB + Pure White (6000-6500k) + Warm white(2800-3200k).Through the RGBCCT Remote controller programming to achieve any of Flashing effects.

Highest 168leds per meter keep the color more uniform.

2835 24V RGBCCT Color Led Strip

· Smaller and thinner design led than 5050, 2400-2700MCD for each 2835 RGB , 48Lm-52Lm for each CCT 2835 LED.

· High density design for RGB and CCT LED Strip, max. 168 LEDs per meter, dot-free and high brightness working with slim profiles.

· Widely applied in commercial lighting, energy saving and environment friendly, high cost-effective performance.

· Customized service available, customized MOQ>1000M, 3 Years Warranty.

·Competitive price, good light performance.

·Fast deliver time ,production 10000 +meters per day.

·longer lifetime,low brightness decay.

·Door to door, airline,ocean deliver service.

Showcase lighting, window-dress, bathroom, advertisement, meeting room, etc.

·Never bend the LED strip more than R = 60 mm.

·Installation must not damage parts of the circuit board!LED strips are fine electronics and must be treated carefully.

·The LED strip is divided into sections with scissors symbol where it is possible to cut the LED strip. Cut LED strip of sharp scissors and always at 90°.

·When soldering the strip, the soldering temperature maximum of 300°C. Follow the polarity closely.

·1- When cutting the strip, use a shrink stocking. Remove 3M tape on the part to be "shrunk"

2-Place the shrink stocking over the LED strip.

3-Use a heat gun!

·Depending on the desired assembly, it may be necessary to point glue IP65 LED strips for permanent fastening. Remember that the substrate must be clean!

·All Glite Led Strips is dimmable by 0/1-10V,DALI,PWM,DMX controller.

·Connect Led 12v/24v to positive on driver, conenct Led - to negative on driver.

·LED must work under correct voltage,never work with incorrect driver voltages!

·Take the led strips from reels and open it before test the light with the driver!