High density 24V 168leds/m RGB 2835 LED Strips GL-FB2835RGB168M08W24 Colorful Lights

1.SMD2835 LED Strip Light, DC24V,192led/m,color temperature RGB;

2.Indoor lighting IP20 and outdoor lighting IP67&IP68;

3.From 10w to 18w adjustable wattage;

4. With standard 3M self-stick , easy for installation;

5. CE Certificated and RoHS compliant;

6. Factory wholesale cost.OEM and ODM service.

Glite RGB 2835 LED strips is Implementation of 7 colour change at the same time can have a pure white light. Single point of single control, high gray level, and can achieve a variety of beautiful effect. Its powerful lighting function to make it more valuable for different application areas.

3 chips in one LED RGB multiple strips is one of the special LED strip series.Special production techniques to make the newest led as light source.Dual white in one LED to keep the color more uniform.

2835 24V Tunable Color Led Strip

·Glite GLC SMD2835 RGB LED strip dramatically improve the appearance of objects.

·It brings us uniform and gentle light. With the features of good heat dispatch, long lifespan and low luminous decay.

·It supplys alternative color rendering solutions for commercial lighting, gallery lighting, advertising lighting , architectural decorative lighting and so on.

·2/3 OZ FPC, original high quality 3M 9495LE tape, 3 or 6LEDS/cut, with special design strong package. LED with LM-80 Test approval.

·Customized service available, customized MOQ>500M, 3 Years Warranty.

·Competitive price, good light performance.

·Fast deliver time ,production 10000 +meters per day.

·longer lifetime,low brightness decay.

·Door to door, airline,ocean deliver service.

Showcase lighting, window-dress, bathroom, advertisement, meeting room, etc.

·Never bend the LED strip more than R = 60 mm.

·Installation must not damage parts of the circuit board!LED strips are fine electronics and must be treated carefully.

·The LED strip is divided into sections with scissors symbol where it is possible to cut the LED strip. Cut LED strip of sharp scissors and always at 90°.

·When soldering the strip, the soldering temperature maximum of 300°C. Follow the polarity closely.

·1- When cutting the strip, use a shrink stocking. Remove 3M tape on the part to be "shrunk"

2-Place the shrink stocking over the LED strip.

3-Use a heat gun!

·Depending on the desired assembly, it may be necessary to point glue IP65 LED strips for permanent fastening. Remember that the substrate must be clean!

·All Glite Led Strips is dimmable by 0/1-10V,DALI,PWM,DMX controller.

·Connect Led 12v/24v to positive on driver, conenct Led - to negative on driver.

·LED must work under correct voltage,never work with incorrect driver voltages!

·Take the led strips from reels and open it before test the light with the driver!