High density 24V 280leds/m 1800K~3000K 2216 LED Strips GL-FA2216DTW280M04W24 with Ce/rohs certificate

1. SMD2216 LED Strip Light, DC24V,280led/m,color temperature 1800K to 3000K dimmable,SDCM<3;

2. Indoor lighting IP20 and outdoor lighting IP67&IP68;

3. From 4.8w to 18w adjustable wattage;

4. With standard 3M self-stick , easy for installation;

5. CE Certificated and RoHS compliant;

6. Factory wholesale cost.OEM and ODM service.

Glite new developed dim-to-warm LED technology with an intelligent circuit, LEDhome DTW LED strip automatically changes Kelvin temp from warm white 3000K to very warm white 1800K, simply by dimming the LED light, using any LEDHOME’s low voltage dimmeable drivers and dimmer, it smoothly warm or cool the color temperature of strip light to suit the mood. LEDHOME DTW LED strip does not require any extra accessories like controllers or receivers by dim power supplier. This saves costs and means it’s very easy to use with no batteries or controllers to keep track of. Simple but easy to warm heart.

GLC 2216 Led Strip Features:

·Glite GLC SMD 2216 LED strip dramatically improve the appearance of objects.

·It brings us uniform and gentle light. With the features of good heat dispatch, long lifespan and low luminous decay.

·It supplys alternative color rendering solutions for commercial lighting, gallery lighting, advertising lighting , architectural decorative lighting and so on.

·2/3 OZ  FPC, original high quality 3M 9495LE tape, 3 or 6LEDS/cut, with special design strong package. LED with LM-80 Test approval.

·Customized service available, customized MOQ>500M, 3 Years Warranty.

1. Dim to warm : when dimming, color temperature is changing from 1800K -3000K synchronically.

2. PWM dimming.

3. Only one channel, instead of 2 channels ( one for White, one for cool white).

Showcase lighting, warehouse, bathroom, living room, meeting room, etc.

·Never bend the LED strip more than R = 60 mm.

·Installation must not damage parts of the circuit board!LED strips are fine electronics and must be treated carefully.

·The LED strip is divided into sections with scissors symbol where it is possible to cut the LED strip. Cut LED strip of sharp scissors and always at 90°.

·When soldering the strip, the soldering temperature maximum of 300°C. Follow the polarity closely.

·1- When cutting the strip, use a shrink stocking. Remove 3M tape on the part to be "shrunk"
2-Place the shrink stocking over the LED strip.
3-Use a heat gun!

·Depending on the desired assembly, it may be necessary to point glue IP65 LED strips for permanent fastening. Remember that the substrate must be clean!

·All Glite Led Strips is dimmable by 0/1-10V,DALI,PWM,DMX controller.

·Connect Led 12v/24v to positive on driver, conenct Led - to negative on driver.

·LED must work under correct voltage,never work with incorrect driver voltages!

·Take the led strips from reels and open it before test the light with the driver!