12V 608leds/m 2700K+6500K flexible COB LED Strips GL-FBCOBCCT608M10W12
Product name 10m constant voltage flexible COB led strip Model NO. GL-FBCOBCCT608M10W12 LED Type TW Led Quantity 608Leds/m Lumen/meter 2000~2100lm /m Actually Power 20w/m CRI(Ra) >90 Max Length 10meters PCB Width 10mm/8mm Voltage DC12V Cuttable Size 27.8mm Color warm white+cold white IP Grade IP20 Ambient Temperature -25℃ ~ +45℃
Product name 10m constant voltage flexible COB led strip Model NO. GL-FBCOBNW320M10W12 LED Type TW Led Quantity 320Leds/m Lumen/meter 1000~1100lm /m Actually Power 10w/m CRI(Ra) >90 Max Length 10meters PCB Width 10mm/8mm Voltage DC12V Cuttable Size 50mm Color nature white IP Grade IP20 Ambient Temperature -25℃ ~ +45℃
1.DC12V,608led/m,color temperature 2700~6000K;
2.Indoor lighting IP20 and outdoor lighting IP67&IP68;
3.From 4.8w to 18w adjustable wattage;
4. With standard 3M self-stick , easy for installation;
5. CE Certificated and RoHS compliant;
6. Factory wholesale cost.OEM and ODM service.
COB led strips is derived from the latest technology of Flip Chip. Compared to traditional SMT, flip chip avoid many problems , for example light failure, flashing, poor contacting etc. Flip chip technology occupy a great advantage.
Glite GFC series
·Without traditional led bracket,golden wire,COB strip is with better bending performance and more efficient heat transfer.
·One chip not work,the section still works with better consistency.
·Invisible resistors,clear appearance.
·Flexible,slim for kinds of application.
·Bend the strips without breaking it.
·Ultra high density linear light,dot-free.
·180° beam angle,high light effciency.
·Customized service available, customized MOQ>500M, 5 Years Warranty.
|Model No.||Led Density||PCB Width||Voltage||Power||RA||Cut Length||CCT||Lumen|
Tips: color temperature 2700K 3000K 4000K 6000K Red Green Blue Pink Amber etc options.
·High light source density in limited space
·Smaller seal and package volume
·more image for lamp design
·better heat dissipation
·more uniform light color distribution.
·Longer lifespan with 5 years warranty;
·Never bend the LED strip more than R = 60 mm.
·Installation must not damage parts of the circuit board!LED strips are fine electronics and must be treated carefully.
·The LED strip is divided into sections with scissors symbol where it is possible to cut the LED strip. Cut LED strip of sharp scissors and always at 90°.
·When soldering the strip, the soldering temperature maximum of 300°C. Follow the polarity closely.
·1- When cutting the strip, use a shrink stocking. Remove 3M tape on the part to be "shrunk"
2-Place the shrink stocking over the LED strip.
3-Use a heat gun!
·Depending on the desired assembly, it may be necessary to point glue IP65 LED strips for permanent fastening. Remember that the substrate must be clean!
·All Glite Led Strips is dimmable by 0/1-10V,DALI,PWM,DMX controller.
·Connect Led 12v/12v to positive on driver, conenct Led - to negative on driver.
·LED must work under correct voltage,never work with incorrect driver voltages!
·Take the led strips from reels and open it before test the light with the driver!